Wall Panel Installation


  1. Determine the layout and positioning of your acoustic panels on the wall. Consider the room's acoustics and aesthetics.
  2. Locate the studs within the wall using a stud finder. Mark their positions with a pencil.

Installation Steps:

1. Marking the Panel Positions

Using a pencil, mark the desired positions on the wall where you'll mount the acoustic panels. Ensure these marks align with the studs you've located. Use a measuring tape and level to ensure accuracy and alignment of the panel positions.

2. Drilling Pilot Holes

With the drill fitted with an appropriate bit (slightly smaller than the diameter of your screws), carefully drill pilot holes at each marked position on the wall. Ensure the depth of the pilot hole is slightly shorter than the length of the screw.

3. Attaching Panels to Studs

Position the first acoustic panel against the wall, aligning it with the marked positions and ensuring it's level. Using the drill/driver, insert a screw through the mounting hole of the panel and into the pilot hole drilled into the stud. Drive the screw until it is snug against the panel but not overtightened.

4. Checking Alignment and Stability

Once the first panel is securely attached, use a level to ensure it is still aligned correctly. Repeat the mounting process for each additional panel, ensuring they are evenly spaced and aligned with each other. Apply slight pressure to each panel to ensure they are securely attached to the studs and the wall surface.

    Note: If you're unsure about any step of the installation process or encounter any difficulties, please feel free to reach out to us at team@hempinthehouse.com